Wireless Keypad – BMGi
$150.00 incl GST
Important – make sure you select the correct
option to suit your gate opener model.
Read more information below if you are unsure
of which option to select.
If you are unsure which keypad option to select please see below:
- Select Option 1 – E8 500 kits purchased from 2021 onwards
- Select Option 1 – E8 500 kits with EGA-04 control board
- Select Option 1 – DACE Ultima RT & HT models
- Select Option 1 – DACE Condo or Sprint models
- Select Option 2 – TMT 400LLS model
- Select Option 2 – TMT 800LS model
If you have any other gate system besides the models mentioned above you will have to order the KP receiver with your keypad. Click here to order the KP receiver
The KP Receiver will need to be wired into your gate control board and the keypad will tune to the receiver.
Tips:- We recommend charging your keypad before installing.
- If you hear 2 beeps during programming then you have made a mistake.
- Red light on is the charger indicator. It lights up when charging and goes out when fully charged.
- Green light is the transmitting indicator, which lights up when transmitting a signal.
- Blue light is the programming indicator and it will keep flashing when your are entering the programming mode. The blue light will only stay on solid if the keypad is locked out.
- Becareful when installing the keypad onto your post that you don’t overtighten the screws. Doing so will distort the keypad housing and allow water to seep through and void your warranty.